10/01/2012
Huawei E1732 Unlocking tutorial - Maximum positive feedback
Do you like this story?
Huawei E1732 USB Modem is using e173du-1 hardware as shown in the above snapshot.
Downloads Needed :
# Download CDMA Workshop Full Version
# Download Firmware Downgrade for E1732
Must need requirements :
1. Firstly you need to disable antivirus of your system. (Because your antivirus will treat CDMA workshop software as a potentially harmful file and will delete it).
2. Download both files mentioned in the download needs.
3. Make sure that your modem is detected in your PC and PORT NUMBER should be noted by you where your modem is connected.
4. Now insert any SIM excluding idea.
Steps to Unlock Huawei E1732 Idea Netsetter :
1) Disable the antivirus till the unlocking process is finished.
2) Insert the modem in your PC.
3) Go to device manager (My Computer >> Properties >> Device Manager) >> Ports(COM & LPT) >> Huawei Mobile Connect - 3G Application Interface (COM[X]), 'X' is the port number appear in your system. Note down the PORT number.
4) Open CDMA Workshop v2.7.0.EXE.
5) Under the 'MAIN' tab select Port number(COM Settings(AT Mode)) Noted Earlier and click the connect button.
6) Now Click on Read Button.
7) Go to Security Tab> Type "oooooo" in the box Under SPC. Click on SPC button >> Send Button with default (nv_read) as SPC.
8) Now Go to 'Memory tab' in NV Items Section click to Read Button. A Confirmation box will appear just click Ok and you will see a NV items box.
9) In the Box 'Last NV' Item type '9999' Click Ok and save the file with any appropriate name.
10) Once the buffer reach 100% your file is saved . Now click Ok on the confirmation box.
11) Now open E1732 Firmware Downgrade(update) and run it and follow the steps and downgrade the firmware.
12) At the end of downloading programs, You will get an Update Failure error message Don't worry just click Ok and then finish.
13) Now Go to CDMA Workshop and on Main tab and click on Finish Button.
14) Unlpug your Idea Netsetter and then plug in again and find the port number as we did above.
15) Now Go to CDMA Workshop and select the Port, Then Go to 'Main' tab and click on connect.
16) Go to 'Memory' Tab Click on NV Items >> Write Button. Click Ok on Confirm Box >> Open dialog box will appear Now choose the file which you have saved before and wait till buffer reaches 100%.
17) An Information Dialog Box will appear as a success confirmation message.
18) Click Ok & Go to 'Main' Tab and click on 'Disconnect'.
19) Now close CDMA Workshop >>> Click No when a confirmation box appears.
20) Now close everything and enable your Antivirus. Now you are done with the Unlocking.
Enjoy high speed internet with your E1732 Data card with any of your favourite SIM Operator. :)
Facing any problem then comment below.. Will reach u ASAP..:)
Subscribe to:
Post Comments (Atom)
10 Responses to “Huawei E1732 Unlocking tutorial - Maximum positive feedback”
15 March 2012 at 19:11
well i try to unlock using above method and try 5 times step by step but no success data card is still locked
15 March 2012 at 20:25
Dude follow the steps properly... Any ways what is the error you are facing????
17 March 2012 at 19:11
Hellow i have unlocked E1732 idea net setter but problem is i cant use NDIS mode ... please help me
18 March 2012 at 14:08
hai i followed the steps above, but iam unable to unlock. After completing all the steps above even my default idea sim is also not working.What may be the problem joshi? Iam getting a dialogu box which says please contact idea support.Unable to register a network
26 May 2012 at 14:19
ya i unlocked e1732 modem i inserted aircel 3g sim i am geting around 200 kbps speed..can u tell me what d actual speed we get after unlocking idea net setter e 1732 modem
6 June 2012 at 15:08
AN - problem with your network not modem
6 June 2012 at 15:09
kishore - surely you have not unlocked your modem properly
6 June 2012 at 15:11
shekhar : it depends on the network but you won't get full 7.2mbps bandwidth.. maximum speed i guess would be around 2 to 3 mbps
4 July 2012 at 13:34
how to install mobile partner in idea netsetter e1732
4 July 2012 at 14:02
http://www.modemindia.com/2012/01/how-to-install-new-dashboard-install.html
Follow procedure from this
Post a Comment